Weka Marine News
Weka Marine has relocated her office
Since the first of September 2021, the office of Weka Marine has moved to the new production location. This means that the office and production activities are back at the same address. The new company address is Industrieweg 2C, 2921 LB, Krimpen a/d IJssel. We...
Weka Marine Steel cooler delivery
During the summer holiday Weka delivered excellent service to replace a steel cooler within two days as a priority project. The vessel m/s Sharon is sailing for a long time with the Weka steel coolers. The initial steel galvanized cooler in this vessel operated for...
The Weka Guard and Protector
The Weka CuNi 90/10 boxcooler has natural anti-fouling capabilities. To keep the boxcooler protected from welding- and stray currents and keep the natural anti-fouling capabilities, Weka developed the Weka Guard and the Weka Protector. The WEKA Guard is a device...
The GRIDCOOLER Keel Cooler
The GRIDCOOLER® Keel Cooler is mounted externally on the hull below the waterline. The engine coolant is circulated through the GRIDCOOLER Keel Cooler, which transfers heat from the coolant before it returns to the engine. The keel cooler is in constant contact...
Weka Marine joins Green Award as an incentive provider for Sea & Inland Vessels
Weka Marine joins the Green Award network, a certification program for waterways to motivate sustainability improvement on board (of ships). Weka offers unique cooling solutions for inland‐ & sea‐going vessels. Accompanied by a range of innovative marine products...
A successful delivery of the Coastal Server build by Tehnomont shipyard Pula d.o.o.
The Coastal Server is successfully launched on the 10th of April. The successful cooperation between Tehnomont Brodogradilište Pula d.o.o. and Moen Marin As Trondheim, Norway continues. The Coastal server is a workboat for the fish farms in Norway, she is 23.98 m...
Material comparison 3 of 3 – Alu/Brass vs Cu/Ni
Alu/Brass vs Cu/Ni In the previous two blog posts, we covered the Copper-Nickel and Aluminum-Brass coolers individually. In those, we went into detail about the benefits and concerns of each material type. This post will compare the two material types and determine...
Material comparison 2 of 3 – The Aluminum Brass coated boxcooler
In this series of three blog posts, we at Weka Marine want to give you more explanation about the types of Boxcoolers that are available. We will do this by going in-depth into the choice of materials. In general, two types of materials are used to produce...
Material comparison 1 of 3 – The Copper-Nickel Boxcooler
In this series of three blog posts, we at Weka Marine want to give you more explanation about the types of Boxcoolers that are available. We will do this by going in-depth into the choice of materials. In general, two types of materials are used to produce...
Happy anniversary Leen – 40 years of service
Leen Leentfaar has been working for Weka for forty years! Leen's family has involved with Weka since its founding in 1957. His father, who was known as Fump and one of the first employees of the Weka company. On February 9, 1981, Leen also joined the company. Since...
We are on the move!
Weka Marine has grown! Since 8 July 2004 Weka has always been located in Krimpen A/D IJssel right next to the city of Rotterdam. The production location has always been industrieweg 8. In these 16 years Weka has grown, expanded and outgrown its business. Since the...
